Leaking pipes are a frustrating problem. You try to use repair tools to fix the problem, but they have no effect. Your basement floor may even get damp because of all the water that is leaking through the cracks in your walls. Do you have to live with this problem? Of course not, there are solutions out there.
The first thing to check is your plumbing’s water pressure. Check the faucets and the toilets to see if there is too much pressure coming from them. If there is, then it may be time to increase that water pressure to reduce the pressure build up. If this doesn’t work, then you may need to install some high-efficiency toilets.
There are times when repairing leaking pipes is simply impossible. This may be due to cosmetic damage that has caused the leak. Some leaks look like they are nothing more than a small hole. In fact, cosmetic damage can cause many problems, such as getting rid of the mess.
Sometimes, though, there are real problems with your plumbing system. One of those problems can be leaks that are caused by corrosion. If the leak is not stopped, it will eventually corrode pipe seals. As the pipes corrode, they will become weaker, which allows more water to leak through, and thus causing more leaks. If you do not fix the corroded seals, then you are actually opening yourself up for leaks that are much larger and more difficult to stop.
Most times, leaks are caused by some type of water damage, which can include seepage, rust, corrosion, or mold. When you have water damage of any kind, you must contact a professional plumbing service. You will need to do more than just find a plumber. A plumber can only help you so much in determining the problem. In most cases, you will also need to repair the leaking pipes that you have repaired with the help of a plumber.
One good reason to hire a professional plumber when you have a plumbing problem is that they have the equipment and expertise needed to locate where the leak is originating from. A professional plumber can also locate places where the leak may have begun. In most cases, you will need to take out old plumbing fixtures in order to determine where the leaking pipes are coming from. Some homeowners try to find the source themselves and often end up with more water damage than they originally had. Hiring a professional plumber eliminates the chance of this happening.
Leaks in the plumbing system are generally easy to repair. Sometimes, however, a leaking pipe may be more complicated. In these cases, hiring a professional plumber is advised. If you attempt to repair a leaking pipe on your own, you run the risk of further damaging the piping system or introducing dangerous materials into the environment. The last thing that you would want to do is put off getting a professional plumber to come out and take care of the problem for you.
The first thing that you will want to do when you have a leaking pipes situation is to find a way to putty the damaged pipe down. You can purchase commercially-available putty from almost any home improvement store. If the damage is on an interior wall, you may have to cut into the wall to put the putty down. For exterior walls, you may have to use some sort of filler to ensure that the leak does not go to the ground.
After you have put the putty on the damaged pipe, it is time to get the plumber out to take care of the problem. Make sure that you have all of your needed equipment with you. You will also need to contact the local plumbing company that handles your area to let them know that you are having plumbing problems and need the services of a plumber. Most companies will help you by calling your local plumber and scheduling an appointment for you to come out and take a look at the problem. They may even offer to haul away your damaged plumbing to their facility for free.
One of the worst leaking problems that people tend to ignore is a toilet that is leaking from below the floor level. Sometimes, the pipes under a toilet will corrode completely and will not be able to be repaired without digging up the toilet itself. However, sometimes, repairing a toilet is easier than most people think. If the leak is on the inside of the toilet, you will simply need to remove the protective covering on the inside of the toilet and use a wrench to remove the nuts that bolt the toilet to the floor. Then, you will be left with two pieces of wood or metal that the toilet will sit on.
Using an epoxy or resin based sealer, apply the sealant to the pieces of wood or metal and screw the pieces back into place. This will prevent any future leaks from occurring in those damaged joints. You should be sure to apply the sealant in all of the joints, as this can easily be missed if you are not doing so. Be sure to apply the sealant to the inside of the pipes, as this can be very difficult to do and can often times leave water marks on the wall that can be very hard to remove. If you are unsure about how to complete the repairs, then hiring a professional plumber is the best way to go.