Standing seam metal roofing panels apply straight-sided, flat substrates or semi-open framing using concealed mechanical clips accessible in various stand-off heights. These clips enable allowance for different insulation thicknesses based upon the clip height. The height must be well calculated since metal roofs are commonly fabricated with a slightly higher ceiling height than the actual roof height. Concealed metal clips are significant in this case. Metal roofing installation does not have to be highly technical and skilled.
Metallic roofs are often shiny, and colors are often picked to match existing surroundings and provide visual contrast. Metal roof installation is quick and easy, with a metal roof installation contractor completing this task with minimum supervision. This makes it easier for contractors to work on commercial metal roofing projects independently and at their own pace. A commercial metal roofing contractor should consider offering many color options to choose from.
Besides offering many color options, metal roof installation details such as flashing are also easy to add. Flashing is needed to prevent shingles from being blown off during strong winds or to block water runoff. Contractors can offer customized sizes and designs. Some will even have these products ready for installation.
Although metal roofing is quite easy to manufacture and install, there are some instances where bad detail, manufacturing defects, or shipping mistakes can lead to poor installation. It is wise to contact Synergy Roofing who provides excellent customer service in these cases. It’s always best to get it right the first time.
Seamless panels are one of the most basic details to look for when hiring a contractor. They provide ease of installation and are available in many different sizes, colors, and thicknesses. These seams are also available with perforated and textured seams. Good seamless panels have high-quality joints that are properly sewn. Any company that claims to have this type of product and cannot provide references or provide clear and accurate documentation should be avoided.
Fasteners are also an important part of a good roof system. Most systems will include fasteners such as screws, plates, and nails, depending on what kind of roof you will be installing. When choosing fasteners, the best way to go is to purchase ones that come with matching colors and are of similar size and strength.
The last detail to consider is the surface on which the panels will be installed. All metals are susceptible to wear after years of exposure to weather and moisture, so the best option is to find a surface that will not be damaged by constant weathering and will allow for easy cleaning. Some of the best options are open framing panels and seamless panels. Open framed panels are best for detached buildings because they do not require a full building attached to them.
A well-designed metal roof system can last for decades if it is properly installed and maintained. Many contractors can offer instructions on installing a roof without any problems, but there are always some problems that arise, and it pays to know how to spot them. This is why it is important to research all your options and make sure you know exactly what you are buying so you get the best roof for your needs.
For instance, flat roofs may not require any flashing and have straight sides. Seam roofing systems have vertical seams that need to be properly sealed with a water-based silicone spray application. If you don’t follow the instructions on the back of your fasteners, you can cause severe damage to your panels. Metal roofing installation with bad detailing and improper fastening techniques could cause your panels to rust or corrode.
Another key aspect of a good system is the panel profile. A properly designed panel profile will allow water to drain away from the structure and provide maximum protection to the surface of your roof. There are two main types of panel profiles that contractors recommend for their clients. These include either direct sloped or cross-sloped. A poor fastening job can lead to unsightly damage to your roof, and a property owner may even face legal action if the problem persists.
Bad installation details and poor fastening techniques can cost you thousands of dollars in roof replacement costs. When choosing a roofer, ask about the warranty on the work. Some roofers offer a guarantee on their labor and materials, while some will cover everything, including a faulty product. When comparing prices from multiple contractors, it’s a good idea to get at least three estimates so that you can compare the price points. If you’re unsure whether a contractor is right for you, keep in mind that quality work is worth more to a property owner than cheap pricing.